Running FF

How FF Works

FF searches the state space forwards from the initial state, using a variant of hill-climbing search and a non-admissible heuristic. The heuristic is computed using a simplified form of the same graph construction used by Graphplan, IPP and other planners. FF, however, rebuilds the graph in each state: thus, it puts a lot of work into expanding each node of the search tree, but when the heuristic works well, it expands relatively few nodes.

In ordinary hill-climbing search, the best (according to the heuristic) neighbouring node is chosen. The hill-climbing variant used by FF works such that if all neighbouring nodes are worse than the current node, a breadth-first search is started outwards from the current node and continued until a better node is found. FF also uses some cut-off techniques so that it does not have to consider all neighbouring nodes when searching for a better node.

Before starting search, FF performs some analysis to try to simplify the goal. If the goal simplifies to the constant FALSE, the problem is provably unsolvable and the planner exits.

Plans found by FF are sequential, and not guaranteed to be the shortest possible.

Input

FF accepts PDDL input, essentially the same subset as IPP (quantified and conditional effects, quantified preconditions and goals and :typing, but not type hierarchies).

Running FF

FF is started with the command

/courses/TDDC17/bin/ff -o <domain file> -f <problem file>

More options are available, most generating more verbose output: run ff without arguments for a list.

Output

Typically, FF's output will look like the following: After some preamble (files read, etc.), hill-climbing search starts ("goal distance" is the heuristic value of the current node):

Cueing down from goal distance:   31 into depth [1]
                                  30            [1]
                                  29            [1][2]
                                  27            [1][2]
                                  26            [1]
                                  28            [1][2]
				  .
				  .
				  .

The number to the right is the depth of the breadth-first search needed to find a better node. This continues until a plan is found:

ff: found legal plan as follows

step    0: LOAD PACKET3 TRUCK3 OFFICE3
        1: LOAD PACKET4 TRUCK4 OFFICE4
	.
	.
	.

Since hill-climbing can get stuck in "dead ends" of the search space, the breadth-first search for a better node may fail. In this case, FF reverts to plain best-first search from the initial state:

Enforced Hill-climbing failed !
switching to Best-first Search now.

advancing to distance :    5
                           4
			   .
			   .
			   .

Switching to best-first search is always "safe" (i.e. it makes the planner complete), but it is too inefficient to be possible for larger problems.

Besides cases when hill-climbing fails, the effectiveness of FF's heuristic on a particular problem can be estimated by how deeply it has to search for a better node at each hill-climbing step.

Known Problems

FF, like IPP, requires all the arguments to an operator to be different, i.e. an action such as (move A B A) is considered impossible regardless of the domain definition. This can cause a problem in some domains: see slidetile.pddl and eight01.pddl for an example, and eight01x.pddl for a possible solution.

Page responsible: Fredrik Heintz
Last updated: 2019-09-24