Test Scheduling for 3D Stacked ICs under Power Constraints
2nd IEEE International Workshop on Reliability Aware System Design and Test (RASDAT), Chennai, India, January 6-7, 2011.
This paper addresses Test Application Time (TAT) reduction for core-based 3D Stacked ICs (SICs). Applying traditional test scheduling methods used for non-stacked chip testing where the same test schedule is applied both at wafer test and at final test to SICs, leads to unnecessarily high TAT. This is because the final test of 3D-SICs includes the testing of all the stacked chips. A key challenge in 3D-SIC testing is to reduce TAT by co-optimizing the wafer test and the final test while meeting power constraints. We consider a system of chips with cores equipped with dedicated Built-In-Self-Test (BIST)-engines and propose a test scheduling approach to reduce TAT while meeting the power constraints. Depending on the test schedule, the control lines that are required for BIST can be shared among several BIST engines. This is taken into account in the test scheduling approach and experiments show significant savings in TAT.
Copyright note for papers published by the IEEE Computer Society:
Copyright IEEE. Personal use of this material is permitted. However,
permission to reprint/republish this material for advertising or
promotional purposes or for creating new collective works for resale
or redistribution to servers or lists, or to reuse any copyrighted
component of this work in other works, must be obtained from the IEEE.
[SIL11] Breeta SenGupta, Urban Ingelsson, Erik Larsson, "Test Scheduling for 3D Stacked ICs under Power Constraints", 2nd IEEE International Workshop on Reliability Aware System Design and Test (RASDAT), Chennai, India, January 6-7, 2011.